What button on the universal remote programs the Converter Box? Are you searching for “what button on the Universal remote programs the converter box”? Get the Universal Remote Codes and programming guide for the converter box here.
There are different Universal remotes out there, so it is important to first check the side of your remote or call customer support on how to correctly program your specific model. However, many people may still look for the “standard” way of doing this.
In this article, we will walk you through the correct way of programming your converter box to a universal remote.
What button on the universal remote programs the converter box?
The converter box isn’t programmed by the remote, it has to be set manually. The user manual for your particular model will have instructions on how to do this. Otherwise, you can check for step-by-step instructions on setting up the converter box with a universal remote.
Step-by-Step Process to Program Universal Remote with Converter Box
Of course, you are asking what button presses on the universal remote programs the converter box.
Since every model of converter box and remote is different it is best if you check out the manual for your particular model. If you do not have a user manual, then search online for step-by-step instructions for your specific model of Converter Box and Universal Remote.
There are several buttons that will need to be pressed on the remote in order to program the converter box. Every converter box and remote is different, so you should check your user manual for step-by-step instructions.
How To Program Universal Remote With Converter Box
Follow the steps below to program a universal remote with a converter box.
1. Turn the converter box off.
2. Press and hold your “Setup” or “select” button on the remote for 4 seconds.
3. Power on your converter box and press “TV” or “TV/VIDEO”.
4. Press the number “0” followed by the number “9”.
5. Enter the code for your Universal remote.
6. Press one of the following command buttons: “Power”, “CH+”, or “POWER”.
7. Turn on your TV and test to see if it works!
If this does not work, run through these steps again. It may take several tries to get this to work.
If you still cannot get it to work, try another code for your brand of Universal remote until it is set correctly.
Remember, if these instructions did not match with what your user manual says, then do not follow these steps and look at your manual to complete it.
Hence, the answer to “What button on the universal remote programs the converter box?” is answered. Universal remotes have different codes for each model of converter box, so you must search in your manual to find step-by-step instructions for your specific model of universal remote and converter box. Feel free to ask any questions you have in the comments below! Stay tuned to Universal Remote Codes.