What are the Sharp Tv Universal Remote codes?

Do you have a Sharp TV and are looking for the right Sharp TV universal remote codes to use with it? If so, you’ve come to the right place!

In this article, we will provide a comprehensive guide on how to program your Sharp TV universal remote. We will also provide a list of all the different remote codes that can be used with Sharp TVs.

sharp tv universal remote codes

So whether you’re just getting started with universal remotes or you’re looking for a new code to try out, read on for all the information you need!

Sharp TV Universal Remote Codes

Sharp TVs are compatible with a wide variety of universal remote controls. We have listed all the different 3-digit and 4-digit Sharp TV universal remote codes below. All you have to do is use the code and program your universal remote and you are all set to go!

sharp tv universal remote setup

Sharp TV Universal Remote Codes List ( 3 Digits)

  • 002
  • 013
  • 014
  • 111
  • 502
  • 509
  • 712
  • 812
  • 813
  • 913
  • 918

Sharp TV Universal Remote Codes List ( 4 Digits)

  • 0039
  • 0093
  • 0165
  • 0386
  • 1004
  • 1009
  • 1011
  • 1025
  • 1064
  • 1077
  • 1078
  • 1081
  • 1097
  • 1099
  • 1153
  • 1157
  • 1274
  • 1298
  • 1311
  • 1312
  • 1362
  • 1375
  • 1378

GE Home Automation Universal Remote Codes

The following are the universal remote codes that are suitable for controlling GE home automation. If you have a GE home automation system, these are the codes that you will need to program your sharp TV universal remote. With these codes, you will be able to control all the different devices in your home with just one remote!

  • 10178
  • 10019
  • 10748
  • 11314
  • 11660
  • 11710
  • 11780
  • 12049
  • 10171
  • 11204
  • 11326
  • 11517
  • 11564
  • 11641
  • 11963
  • 12002
  • 12183
  • 10463
  • 11463
  • 10748
  • 11314
  • 11660
  • 10171
  • 11204
  • 11326
  • 11517
  • 11641
  • 11780
  • 11785
  • 11892
  • 11963
  • 12002

How To Program Sharp TV Universal Remote

We have explained two possible different methods to program your Sharp tv universal remote. The first method covers the manual code input method while the second one is the auto-programming process. The auto-programming process doesn’t require you to know any Sharp tv universal remote codes. Here are the two methods for programming your Sharp TV with a universal remote.

  1. How to program Sharp TV universal remote with codes
  2. How to program Sharp TV universal remote without codes

Let’s know about these two methods in detail.

How To Program Sharp TV Universal Remote

If you want to start using the sharp TV universal remote, you need to know how to program it first. For this, you must get the correct Sharp TV universal remote codes. In case your device has more than one universal remote code, you have to keep trying the codes until you find the correct one. Here are the steps you need to follow:

  • Firstly, turn on the Sharp TV that you want to program the universal remote for.
  • Then, take the universal remote and point it directly towards the TV.
  • After that, press and hold down the “TV” button as well as the “CH+” button for a few seconds.

sharp tv codes for sky remote

  • Once you have done that, enter the Sharp TV universal remote codes that we will provide for you later on in this article.
  • When you are entering the codes, some of them might not connect. If that happens, just keep trying different codes until you find one that works.
  • Once you have found a code that works, the light on the remote will stop flashing.
  • After that, press the “TV” button in order to save the code.
  • Finally, press the Power button. If your Sharp TV turns on, it means that you have successfully programmed your universal remote.

If your TV doesn’t turn on, try repeating the steps again with a different code. You can also follow these same steps to program other devices that are compatible with your universal remote.

How To Program Sharp TV Universal Remote Without Codes

If you want to program your sharp TV universal remote without using codes, you can do so by following these simple steps. This method works for all the other devices that can be paired up with your universal remote in case you can’t find the correct universal remote codes for the device. Follow the steps given below to program your sharp TV without using codes:

  • Firstly, turn on the Sharp TV that you want to program the universal remote for.
  • Then, take the universal remote and point it directly towards the TV.
  • Now, press and hold down the “Setup” button for a few seconds.
  • After that, enter the code “9-9-1”.
  • Then, press and hold down the “Power” button and press the channel up “CH+” button until your TV turns off.
  • This indicates that your TV has been programmed with the remote.

Conclusion

We have provided a list of the different Sharp TV universal remote codes that you can use. We have also provided a step-by-step guide on how to program your Sharp TV universal remote without using codes. By following the steps given in this article, you will be able to successfully program your sharp TV universal remote and use it with any other compatible device. Hope this was helpful. Stay tuned to Universal Remote Codes for more information.

Leave a Comment

%d bloggers like this: