Pyle Soundbar Universal Remote Codes & Programming It

Pyle Soundbar Universal Remote Codes: If you are looking forward to using a universal remote control for your Pyle Soundbar, then this guide is for you. Get the list of universal remote codes for Pyle Soundbar here and also know how to program your device with the remote.

Soundbars are all-in-one speaker systems that offer high-quality TV sound without any extra speaker setup. These soundbars can be used to make your regular TV a home theater system with its quality sound experience. They can fit in easily in your home which is quite an advantage when compared to the speakers.

With a universal remote, you can easily control TV, Cable Satellite Box, DVD player, VCR, Blu-ray, and also audio devices like soundbars. If you have got a Pyle soundbar, then you can use a variety of universal remote brands for your device. Know the list of Pyle soundbar universal remote control codes below.

Pyle Soundbar Universal Remote Codes

Let’s see the Pyle Soundbar Universal Remote Codes below. Based on the soundbar model, there are 3-digit, 4-digit, and 5-digit remote control codes. You can also check the remote instruction manual to get the codes.

5-Digit Pyle Soundbar Universal Remote Codes

• 12196
• 12641
• 11830
• 10156
• 11531

4-Digit Pyle Soundbar Universal Remote Codes

• 2421
• 5674

3-Digit Pyle Universal Remote Codes

• 782

How To Program Pyle Soundbar Universal Remote

There are three different methods that are possible to program a Pyle Soundbar with a universal remote. Here are the three methods that we are talking about.

1. How To Program Pyle Soundbar Universal Remote With Codes
2. How To Program Pyle Soundbar Universal Remote Without Codes (Auto-Code Search)
3. How To Program Pyle Soundbar Universal Remote Using Code Search

So these are the three methods that we can use and program a Pyle Soundbar device with the Universal Remote Codes. Let’s check them one by one.

Pyle Soundbar Remote Control Setup With Codes

This is the simplest and straightforward method to program a Pyle Soundbar to a universal remote. For this method, you are going to need the “Universal Remote Key Code” for your soundbar. You can get the codes from above or you can also check the remote instruction manual for “Pyle Soundbar Codes”. To program your Pyle Soundbar with a universal remote, follow the steps given below.

• Firstly, turn on the soundbar and the TV which is connected to it.
• Now, press on the “TV” key on the universal remote.
• Press and hold the “Setup” button until you see the light flashes on the remote.

• Now, release the Setup key and enter the universal remote key code.

• Point your remote at the TV and press and hold the “Power” button.

• Once the device turns off, release the Power key.
• Your soundbar is successfully programmed with the remote.
• If the device doesn’t turn off, then follow the same procedure again and enter the next code.

Program Pyle Soundbar Universal Remote With Auto-Code Search

If you don’t have the correct Pyle Soundbar Universal Remote Codes for your soundbar, then you can use the “Auto Code Search” method. This is an easy technique to try all the universal remote codes and find the correct one for your device. Follow the steps given below to program your Pyle Soundbar universal remote.

1. Firstly, turn on the TV and Soundbar and point your universal remote at the TV.
2. Now, press and hold the DEVICE (TV/AUX/CBL/SAT) key until you see a red LED light flashing on the remote.
3. Press and hold the “CH+” & “CH-“ keys until the remote shows on/off signals.
4. Next, press and hold the “Up” or “Down” button until the device turns off.
5. To verify the code, press the “Power” key. once and release. The TV should turn on if the code was successfully programmed into the device.
6. Finally, save this code by pressing the DEVICE key. The LED light will flash twice to confirm the code.

Program Pyle Soundbar Universal Remote Using Code Search

This is another automatic method that you can use to find the code for your soundbar. The “Code Search” technique is time-consuming and may not work all the time. It is always better to go for the first method given here, but if you don’t have the codes, then try the steps given below.

• Firstly, turn on the soundbar and TV and point your remote at the device.
• Now, press the “Code Search” or “Setup” key on your universal remote.
• Next, enter the three-digit code “9-9-1” with the remote keys.
• Press and hold the “Power & CH +” keys simultaneously until your device turns off.
• If the device turns off, then it means the programming is completed successfully.
• If the soundbar doesn’t turn off, then it means the code search method was not successful.

Code Search For Pyle Soundbar Using DIRECTV Universal Remote

The code search technique is a bit different for different brands of universal remotes. If you are using a “DIRECTV” universal remote to program with your Soundbar, then follow the steps given below.

• Firstly, turn on the soundbar and point your remote at the device.
• Now, make sure the device is muted and press the “Volume Up” key.
• Next, press the AV1 or AV2 key on the remote.
• Press and hold the MUTE and SELECT keys until the remote blinks twice.
• Enter the three-digit code “9-9-1” and wait for the remote to blink twice.
• Now, enter the key “3” and press and release the “Volume Up” key.
• Then, keep pressing and releasing the “CH+” key until the volume changes.
• To save this code, press the “SELECT” button.

Program Pyle Soundbar Using Comcast Universal Remote

If you want to program your Pyle Soundbar with an Xfinity Comcast Universal Remote, then follow the steps given below.

• Firstly, turn on the soundbar and point your remote at the device.
• Now, press and hold the “Setup” key until the LED turns from red to green.
• Enter the Universal Remote Code for your soundbar using the keys.
• If the code is correct, then the remote will blink green twice.
• If the code is incorrect, then the remote will blink red. Use other codes in this case.

Conclusion

That was all about the Pyle Soundbar Universal Remote Codes. If you have a soundbar from the Pyle brand, then you can easily use the codes given here and program your audio device with a universal remote. If you are facing any trouble while programming your soundbar, you can use the comment box to reach us. Keep visiting Universal Remote Codes for more useful guides.