How To Program GE Universal Remote {3 Working Methods}

Do you want to know how to program GE universal remote? Learn the complete procedure to program GE universal remote in simple and easy methods in this guide. Also, get the full list of GE universal remote codes here for different brands.

GE or General Electronic universal remote is a useful tool that allows you to operate multiple devices with a single remote control. Home entertainment devices like TV, blu-ray, television, DVD player, VCR, stereo systems are supported to be programmed with GE universal remotes.

One should know how to program GE universal remote so that they can use this remote for various devices at home. With a single GE universal remote, you can easily operate multiple devices successfully. Know how to program GE universal remote using various methods below.

How To Program GE Universal Remote

There are different possible methods using which you can program GE universal remote. Here are the three methods that are used for programming GE universal remote with any device brand.

1. How to program a GE universal remote with codes
2. How to program GE universal remote without codes
3. How to program GE universal remote using code search

So these are the three methods that we can use and program an electronic device with the GE Universal Remote Codes. Let’s check them one by one.

How To Program GE Universal Remote With Codes (Manual Method)

Before you start the programming of your device into the remote, make sure you have the correct code for the device. The universal remote codes vary with brands and the type of device. Therefore, make sure to get the remote code from a GE universal remote manual PDF. Or you can also get the GE universal remote codes in this post below.

• Turn on the device that you want to program into the GE universal remote.
• On the remote, press the DEVICE key (TV, DVD, CBL, and AUX) and then press and hold the “Setup” key.
• Once the remote flashes a red light, release the key and start entering the code.
• Enter the Key Code using your GE universal remote keys.
• Now, point the remote at the electronic device and then press the Power button.
• The device should turn off upon pressing the power button. If the device doesn’t turn off, then it means the code is not correct. Try another code and repeat the same procedure.

How To Program GE Universal Remote Without Codes

The GE universal remote codes are necessary for the programming of remote with the device. But, if you don’t have the code, then you can use the auto-search or auto-explore method. Know how to program a GE universal remote without codes below.

• Firstly, turn on the device that you want to program into the universal remote.
• Now, press and hold the DEVICE button (TV, DVD, CBL, and AUX) on the remote for 3 seconds or until the LED light flashes.
• Press and hold the “CH+” & “CH-” keys on the remote until the remote shows on/off signals.
• Once you see this, press the “Up” or “Down” buttons continuously until the device is turned off.
• To verify the code, point your remote at the device and press the “Power” button. If the device turns on, then it means the code is correct.
• Finally, you have to save this code. To do so, press the DEVICE key. The key will blink twice to confirm the code was saved successfully.
• This is how to program GE universal remote without codes.

How To Program GE Universal Remote Using Code Search

Not having the GE universal remote code? If you are worried about how to program a universal GE remote with code, then there is a workaround for you. Here is how to program GE universal remote using the code search method.

• Firstly, turn on the device that you want to program into the universal remote and point your remote at the device.
• Now, press the “Code Search” or “Setup” key using your GE universal remote.
• Next, enter the three-digit code “9-9-1” with the remote.
• Press and hold the Power button and now press the “CH+” button until your device turns off.
• If the device turns off, then it means the programming is completed successfully.

How To Find GE Universal Remote Codes

If you want to know how to program GE universal remote, then you must also know what are the codes. Here are the simple steps that can be used to find the correct code for your device.

• Remove the back cover of your GE universal remote and remove the batteries.
• Note the version number available on the remote.

• Insert the batteries back into the remote and cover the batteries.
• Go to byjasco.com/support/ge-universal-remote-codes in a web browser.
• Select the version number of your remote from CL3, CL4, or CL5.

• Then, select the type of device and the brand name from the given list.
• The GE universal remote code for your device will appear on the screen.

GE Universal Remote Codes List

We have seen how to program a GE universal remote till now. Now, here are the GE universal remote codes that you can use while programming your device to a universal remote. Just get the code for the respective brand and enter the code for programming your remote.

Conclusion

We hope you got to know how to program GE universal remotes easily. The GE universal remotes can be programmed with various electronic devices easily once you know how to program GE universal remote. The GE universal remote program can be done with or without key codes. If you still have any doubts, share them with us in the comments section. Universal Remote Codes is always at your help.