Jumbo Universal Remote Codes & Program Instructions

Jumbo Universal Remote Codes List: If you are looking for the jumbo universal remote codes, then you have come to the right place. Get all the universal remote codes and all-in-one remote codes for jumbo remotes of various brands here. Also, know how to program your devices into the universal remote using multiple methods here.

Jumbo universal remotes serve the same purpose as regular universal remotes but are larger in size. These remotes can be used to control TVs, DVDs, Sound Bars, Audio Players, Satellite Receivers, Cable Boxes, etc. The jumbo universal remotes are mainly designed for people with sight issues. These remotes extend to 11 inches long and 5 inches wide.

jumbo universal remote codes

The jumbo universal remotes can be paired or programmed with various devices of a large number of brands. With a universal remote, you don’t have to use different remotes for each electronic device separately. These all-in-one remotes make it easier to control your machines with a single remote. Know what are jumbo universal remote codes below.

Jumbo Universal Remote Codes

The following are the Jumbo universal remote codes for different brands. Check the Jumbo universal remote codes list below or you can also check the instruction booklet or user manual that comes with the jumbo universal remote.

innovage jumbo universal remote codes

Innovage jumbo universal remote codes are also similar to the ones given below. If you are looking forward to programming your soundbars, TVs, DVD players, cable boxes, etc, with your remote control, then you can use the following jumbo universal remote codes.

Jumbo Universal Remote Codes List

All-In-One Jumbo Universal Remote Codes

1. 000
2. 001
3. 002
4. 005
5. 200
6. 006
7. 172

How To Program Jumbo Universal Remote Without Codes

Don’t know what are the Jumbo universal remote codes? No worries! If you want to program your TV, DVD, or any other device with universal jumbo remote codes, but don’t have a code, then you can use the auto search method. Using the auto search method, you can easily save the code and program the remote.

jumbo universal remote tv codes

  • Firstly, turn on the device (TV, DVD, CBL, or any other device) and point the jumbo universal remote at the device.
  • Now, press and hold the DEVICE button (TV, DVD, CBL, and OK/SEL) for 3 seconds or until you see the DEVICE key flashes.
  • Next, press the “CH+” & “CH-“ buttons on the jumbo universal remote.
  • This will make your remote show on/off signals on your remote. Once you see this, press the “Up” or “Down” button continuously until the device turns off.
  • To verify the code, press the “Power” button on the remote. Your device should turn on if the code was successfully programmed into the device.
  • For saving the code, press the DEVICE key (TV, DVD, CBL, and OK/SEL). The DEVICE key will flash twice to confirm the code.

How To Program Jumbo Universal Remote With Codes (Manual Method)

Jumbo universal remote codes are given above. If you want to program your jumbo remote with the TV or any other device, then you must have a code for the respective brand. Make sure to get the code from the Jumbo Remote Control Manual. Follow the steps given below to program your device with jumbo universal remote TV codes.

  • Firstly, turn on the device that you want to program into the jumbo universal remote.
  • Now, point the jumbo universal remote at the device properly.
  • Then, press the button for the DEVICE you want to program into the remote. For example, press the “TV” button if you are programming your TV with the remote.
  • Next, press and hold the “Setup” key until the key flashes a light.
  • Enter the key code for the device and press the “Power” key until the device turns off.
  • If your device turns off, then it means the code was correct and the programming is done successfully.
  • If the device doesn’t turn off when you press the Power button, then use another code and repeat the same procedure.

How To Program Jumbo Universal Remote Using Code Search

If you don’t have the Jumbo universal remote codes, then there is no need to worry. Using the code search key on your universal remote, you can easily get the suitable code for the device and program the code for TV or other devices successfully. Follow the steps given below to program your device with jumbo universal remote codes.

universal jumbo remote codes

  • Firstly, turn on the device that you want to program into the jumbo universal remote.
  • Now, point the jumbo universal remote at the device properly.
  • Press the “Setup” key or “Code Search” key on the remote and enter the three-digit code “9-9-1”.
  • Then, press and hold the Power button and also press and hold the “CH+” button until the device turns off.
  • If your device turns off, it indicates that the programming is done successfully with the jumbo universal remote codes.

Conclusion

We have given the list of jumbo universal remote codes in this guide. It is also mentioned how to program your devices with jumbo universal remote controls successfully using various methods. To get the jumbo universal remote codes, you can also check the jumbo universal remote control manual. If you want to get more useful guides from us in the future, then stay tuned to Universal Remote Codes. That’s all for this post.

Leave a Comment

%d bloggers like this: