Are you facing problems due to battery corrosion in your remote control? This happens to a lot of regular remote and universal remote control users. Well, how about we learn how to clean battery corrosion in remote control?
We all know how important it is to keep our things clean and tidy. It is very much essential for us at home as well as at the office. Our workplace becomes happier and positive with a shared sense of pride when everything around us is clean and shiny.
In this article, I will tell how to clean battery corrosion in remote control by using a few common household items.
What is Battery Corrosion?
Battery acid is formed when a battery is overcharged or discharged. Acid leaks out of the batteries and this results in damage to the surrounding device due to rusting of its metal parts.
The battery acid reacts with the metal parts of remote control and battery terminals to form a layer called oxidation. This oxidation is seen as rust on the metal parts.
When this way, how to clean battery corrosion in remote control? The answer is simple – Preventive measures!
How to Clean Battery Corrosion in Remote Control?
However, how many times we have forgotten to clean or keep our remote control intact after its use? Due to the exposure of the device to dust and dirt particles on a daily basis, there arises a need for us to learn how to clean battery corrosion in remote control.
Supplies needed for the cleanup
- Baking soda (sodium bicarbonate)
- Water (distilled if possible)
- Dishwashing liquid or soap
- Ear Swabs or Toothbrush with soft bristles
- Scissors or knife
Steps now we need to clean Battery Corrosion in Remote Control.
- Open the battery door
- Remove the batteries
- Spray vinegar/lemon juice on the corrosion
- Spread the vinegar/lemon juice around
- Scrub the corrosion away
- Wiping the corrosion
- Clean the electrical contacts
- Install Cleaned Batteries
So these are the 8 new steps which you need to perform in order to clean the battery corrosion in remote control. So check them one by one.
Open the battery door
This is the first step in how to clean battery corrosion in a remote control. Remove the batteries from your remote control and open its battery door.
Remove the batteries
Once the battery door is open, remove the old batteries.
Spray vinegar/lemon juice on the corrosion
Next, spray some concentrated vinegar or lemon juice on the corroded part of your device.
Spread the vinegar/lemon juice around
Spread the vinegar/lemon juice around the affected areas. It is very important to ensure that you spread the liquid to all corroded areas.
Scrub the corrosion away
Use an ear swab to remove the corrosion carefully. You can also use an old toothbrush or discarded toothbrush if it has soft bristles. Make sure you do not press too hard as it may damage your device!
Wiping the corrosion
Now use wet cotton swabs to wipe away the remaining debris/rust. You can also use a clean soft cloth or tissue paper for this step.
Clean the electrical contacts
This is how you clean battery corrosion in remote control with baking soda (sodium bicarbonate). Use some diluted baking soda water to clean the electrical contacts of corrosion from battery terminals. Dip a cotton swab in the solution and gently wipe off the stains.
Install Cleaned Batteries
This is how you remove corrosion from batteries. After removing all the corrosion, install your new batteries.
So these are the 8 steps which you need to perform in order to clean battery corrosion in remote control.
Conclusion
We hope that how to clean battery corrosion in remote control is now clear and understandable. If you think we have missed something, or if you find anything confusing please let us know in the comments!
Lastly, if how to clean battery corrosion in remote control helped you out, please share this with others on social media! Thank you for reading our article! Stay tuned to Universal Remote Codes for more useful and updated information.